Please help,

Vfstab stops at boot.
I have searched and could not figure out what I keep doing wrong. Here are my two lines that don't seem to work.

/dev/dsk/c9d0p2:c - /windows/fat32 pcfs - yes -
/dev/dsk/c10d0p1 - /windows/ntfs fuse - yes subtype=ntfs-3g

Here is my fdisk
(a)
0. c9d0 <DEFAULT cyl 18456 alt 2 hd 255 sec 63>
/pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0


Total disk size is 24321 cylinders
Cylinder size is 16065 (512 byte) blocks

Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS: NTFS 0 2549 2550 10
2 Ext Win95 2550 5859 3310 14
3 Active Solaris2 5860 24318 18459 76

(b}
1. c10d0 <drive type unknown>
/pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0

Total disk size is 36480 cylinders
Cylinder size is 16065 (512 byte) blocks

Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS: NTFS 0 36480 36481 100


Please show me the error of my ways

Thanks,
Pete K

Hi Pete,


I have probably overlooked what is wrong.

Sometimes being more explicit is helpful, also doing as explained in
http://www.tuxera.com/community/ntfs-3g-faq/#bugreport

Regards

Jean-Pierre